Hot Sale ESE Lightning Rod Early HD-T6.3 Advance Discharge Lightning Rod Lightning Protection System
HD-T6.3/0.5 advance discharge lightning rod made of special stainless steel material, needle (needle) height 500mm ,receiving flash capacity 200KA, with simple installation, corrosion resistance, suitable for direct lightning protection of small objects. Can also be installed with lightning rod installation bracket will be installed in a relatively high position, as a standard receiver use.
Lightning rod protection radius as shown in the figure.
Lightning rod body using threaded connection, needle rod and flange plate using on-site welding, installation and fixing according to the site will be flange plate fixed root can be, while the lead wire and flange plate connection, can be fixed in the flange plate can also be welded on the steel pipe, can also be fixed directly on the daughter wall above.
Grounding resistance requirements. 10 ohms.
An Early Streamer Emmision air terminal, also known as ESE or as an ionizing lightning rod, is an external lightning protection system with innovative technology. This ESE air terminal is also known as active lightning rod.
At its start, the lightning bolt travels through a downward leader that propagates in jumps in any direction. When the bolt approaches the ground it can hit any object. The aim of the lightning rod is to become the point of discharge of the bolt in order to achieve a controlled impact without damage.
The ESE air terminal emits a continuous upward leader with time of advance to anticipate the descent of lightning and capture it before any other object within its protection area. The time of advance of the ESE determines the protection radius of the ESE air terminal: the more the upward leader anticipates, the higher the downward leader is captured and prevents lightning strikes in a larger area.
