AC220V LED Aviation Obstacle Warning Light Anti Corrosion 10W

Specification

In the shape of a large group of buildings set barrier lights, should be able to see the outline of the object from all directions, the horizontal direction can also refer to the spacing of about 45 metres set barrier lights general buildings should be installed on top of its barrier lights higher than 150 metres high objects, in its top set high light intensity A type barrier lights, and with the medium light intensity of the barrier lights with the use. Higher than 105 m and less than 150 m high objects, should be set at the top of its medium light intensity A type obstacle lights, the middle layer should also be installed with obstacle lights, and spacing as equal as possible.
Super high voltage transmission line tower top should be set high light intensity B type obstacle light, and make three layers of synchronous flashing. The position is the top of the tower, the lowest point of the cable sag line and two midpoints.
LED light source has the advantages of high efficiency, environmental protection, energy saving, stability, etc., established the status of the best light source for aviation obstacle lights.